Spoon holder to keep your kitchen plan clean.
Anti sauce stains....
Ideally, PET or PETG filament certified for food contact should be used. On the 3D Machines site, there are this type of filaments (brand ZORTRAX):
Nozzle diameter: from 0.2 to 0.6 mm (0.4 recommended, for faster printing, the parts are quite large)
Height of layer: 0.3 mm (recommended) or 0.2mm
Wall Thickness: 0.6 mm 0.8 mm or 1.2 mm (depending on nozzle diameter, ideally a wall with 2 print head passages for good resistance)
Fill rate: 25%.
Top and Bottom Thickness: 0.6 mm
Brim: YES (8mm for example)
Support: Yes, percentage between 15% and 20%.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!