Valeria is a very clean and stylish lamp. Its small dimensions makes it suitable to be used has a bed side table lamp or in a living room. It is easy to assemble and print. It is support free and it doesn't need glue to be assembled. It was design for best print quality on FDM Printers.

Recommendations:
Material: PLA
Temp: 200 °C
Speed: 50 mm/s
Outer Shell Speed: 35 mm/s
Shell Thickness: 0.8 mm
Infill: 25%

Note:

Before Assemble the base pieces, you must remove the support piece from the "Base_Superior.stl" (see picture "I_3").