Skip to content

Unicorn Night Light

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

A Unicorn Head Nightlight. The head and horn are printed separately. They are designed to be used with small LED lights. There is a bar in the middle of the head that you can use to hook the light on so that it stays in place. There is a similar bar at the bottom of the horn, near the opening. It can be tricky pushing the light past the bar in the horn and I do not recommend printing it at a smaller scale. There is an anchor at the bottom of the head so that you can tie up the wire from the horn to keep the horn tightly in place.

I have printed it with natural PLA and glow in the dark green and blue PLA and they all work fine. Any translucent PLA should be suitable.

For the lights I used one blue and one white LED in the head and one red LED in the horn. They were purchased here:

This is what I used as a power adapter:

I used a three terminal switch, bought here, to switch between the LEDs in the horn and head. A diagram for how to wire a three terminal switch is in the pictures above.

  • 3D file format: OBJ and STL
  • Publication date: 2019/04/30 at 10:33





Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!