Trash can with swing lid

A beautiful trash can suitable for your home, office and especially bathroom.
Compared to its size it uses little material and is very sturdy. The container can be used with or without the print-in-place swing lid.

Included versions:
- the Body with 230mm height (default)
- the Body with 210mm height
- the Lid – print-in-place (default and recommended)
- the Lid with both parts separated – print them this way if your printer tends to mess up gaps - to join them just bend the ring a little and insert the lid

Size assembled default: 210 x 210 x255 mm

This is the V2
Don’t forget to post your makes!

Required build volume: 210 x 210 x 240 mm
Material usage: Body 180g; Lid 150g
Print time: Body 18h; Lid 13h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
“Fill gaps between walls” switched off for the bin. This setting may mess with the seams and print time if switched on (cura)