To put some order on my desk, I designed this modular ToTEM: phone charger, compartments for all the invasive "stuff", enough to store tools or pens, put a flower pot...
The construction is simple: the trunk is a simple piece of curtain rod that can be found everywhere (Ø 35 mm) that must be cut (beware of fingers!) to the desired length according to the number of modules you want to put (30 cm on the pictures, but you can make it bigger). A few wood screws and a little patience to print everything.
Each module can be rotated thanks to the magic of 3D printing! There is a gap of 0.35 mm. in the hinge: make sure that your printer is accurate enough.
A small screw is required to fix the module at the desired height.
I use it on my desk, but you are free to find your own composition: storage of your 3D printer tools, jewellery, aromatic plants...
Each component can be printed on a 180 mm Ø tray like NEVA, or on all printers with a tray of this size.
No support ;-)
Average filling 15 / 20 %.
I can provide STEP or IGES files for those who want to make adaptations.
A little "LIKE" if you like this project.
Have a good print!
Layer : 0,2 mm or less if you are patient
15 to 20% infill
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!