Skip to content

Tom Dixon's Etch Shade inspired Lamp

3D model description

Tom Dixon's Etch Shade inspired Lamp.
You'll need:

  • 3x etch120cable x3.stl
  • 1x etch120-puerta-A.stl
  • 1x etch120-puerta-B.stl
  • 20x etch120 x20.stl
  • 1x etch120_sopcable2.stl

Tom Dixon's Etch Shade inspired Lamp by egrojyos is licensed under the Creative Commons - Attribution - Non-Commercial license.

3D printing settings

Tom Dixon's Etch Shade inspired Lamp.

You'll need:

  • 3x etch120cable x3.stl
  • 1x etch120-puerta-A.stl
  • 1x etch120-puerta-B.stl
  • 20x etch120 x20.stl
  • 1x etch120_sopcable2.stl

Requirements

  • 1 x M3 bolt to restrain the wire inside the "etch120_sopcable2.stl" Wire (5-6mm external diameter)
  • 1 x light bulb base (maybe you need a plastic clamp to atach the wire inside the base)
  • 96 x 2-2.5 mm width white plastic clamps to join the faces
  • 1 x plastic clamp to make the pendant tie with the wire
  • 1 x spotted omni directional bulb (no LED or white bulb, you need a point light or concentrated light to guet the best results). A good one is an halogen bulb http://www.cherylpettdesign.com/wp-content/uploads/2014/02/halogen.jpg
  • 3D file format: STL

Tags

Creator

License

CC BY NC SA

Page translated by automatic translation. See the original version.


Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!