Tea bag dispenser

A modular tea bag dispenser for an organized kitchen.
It fits a maximum of 25 bags and you can always see which tea is inside due to the open design.

Maximum tea bag size: 66x77 mm (If you have bigger tea bags: scale the thing up).
Size of the dispenser: 60mm x 72mm x 210 mm
Diameter of the two holes: 5,5mm.

Included parts
- Tea bag dispenser
- Wall mount for one
- Wall mount for two
- Wall mount for three

Instructions (also provided in the images)
- Print the holder and wall mounts (the size of your choice)
- You can either screw or glue the mount onto your wall. There are various glue or tape products for wall fixation out there. I used 3M Tape.
- Fill it up (The easiest way is removing the dispenser from the holder and putting the bags in one by one.)
- Enjoy!

Don’t forget to post your makes!

Required build volume: 200 x 200 x 220 mm (the wall mount for three need to be rotated to fit)
Material usage example Tea bag dispenser + wall mount for one: 90g
Print time example Tea bag dispenser + wall mount for one: 11h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: a brim for the dispenser is recommended, for the mounts no adhesion is needed
If you experience any problems, please feel free to contact me on twitter or Instagram