Vinyl support

Create your own vinyl holder!

**

In addition to offering a neat and design presentation, this model is designed so that your Vinyl records are now easy to handle and find.

**

Mountable in less than 5mins, you will just need to assemble the two "V" pieces on the "X" piece.

Once the pieces are assembled, you can add your disks ; )

I recommend printing all your pieces flat if possible. If not, consider adding supports for the "V" piece.

**

Make sure that the first layer adheres properly to the tray.

Concerning the printing precision, you can take the one that will suit you best. For my part, I chose a precision of 0.2mm.

The amount of filling will affect the strength of the 3 parts, that's why I don't recommend going below 10%.

**

Feel free to share your creations ; )