Stick-on cupholder / drink holder for car interior
- 230 views
- 0 likes
- 17 downloads
3D model description
V2 now included, with a closed loop design requiring much less support when printed upright and increasing rigidity.
This is a slim and sleek cupholder that I designed to stick on to a vertical surface in the passenger footwell of my car (an '80s Nissan).
This will be mainly suitable for older vehicles that have flat sided surfaces that you can stick on to with some quality double sided tape or hot glue.
If you like this design, message me and I can revise it to work specifically for your application.
Includes a second, removable ring that sits in the top and stabilises cans.
3D printing settings
Either use 100% infill or 1.6mm walls (only area that needs infill is the attachment point).
Print upright with 60 degree support overhang angle and about 40% support density with a wall line count of 1. I use gyroid (CURA).
Support brim suggested as the supports are fairly tall and thin.
- 3D file format: STL
- Last update: 2020/11/07 at 13:37
- Publication date: 2020/10/30 at 11:19
Hello! I am a tinkerer and engineering enthusiast from Christchurch, New Zealand.
I have an Ender 3 V2 and a Zonestar Z6FB.
I am glad to provide all my CAD work for free as an ameteur, but if you want to return the favour, please give feedback on any designs you print of mine!
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!