This file is no longer free and/or is part of #paywithaprint for more info visit https://www.eastwestmain.com/product/square-lamp/
I'm not including any wiring instructions as I am not an electrician. I searched how to wire two lights to one switch and kept searching till I felt confident enough. If you don't know what you are doing then don't do it. I am not responsible if you get shocked or any other bad thing that might happen. With that out of the way the wiring is super simple.
Printed without support and 0% infill. Models uploaded in correct orientation for printing.
LampTopBottomWhite - Print 2 I had the best luck printing separately
LampMidAnyColor - Print 1 I printed in black
CenterInsertAnyColor- Print 1 This slides into LampMidAnyColor and holds the bulbs and wiring
Parts needed in one Kit
Candelabra Base x2 - I cut the roller switches out and used just the clip in bulb sockets and one plug end. The rest of the wiring was done with the second cord.
Rocker switch 16a 125v - I like using these because they mount clean... and I had one laying around
Bulbs - Use E12 LED lights to cut down on heat and I wouldn't go any higher than 40 Watt equivalent.
Other things spade connectors, wire nuts, heat shrink, electrical tape, etc
Again - I'm not including any wiring instructions as I am not an electrician. I searched how to wire two lights to one switch and went from there. If you don't know what you are doing then don't do it. I am not responsible if you get shocked or any other bad thing that might happen.
Turning ideas into products with 3d printing
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!