This is a spice rack for larger bottles up to 54mm.
I had printed another one that I found here on Thingiverse but it didn't really fit most of my spice bottles, so I made this one instead.
Measurements are 195 x 60 x 35mm so it will fit on a small printer. I made the bridges in the openings only 12mm long, so the printer should be able to clear them cleanly without any supports as long as its printed with a cooler temperature. This was printed with a brim to keep it nice and flat, cleanup was pretty easy since its all straight lines.
Printed with my favorite material Hatchbox wood PLA.
It'll hold up to a 54mm bottle, can or jar and is meant to be mounted with double sided tape on the solid beams on the rear.
I made the bar on the front fairly low, so labels are easily visible. They stay put for me, but if you tend to slam the cabinet door shut, you might want to put only plastic bottles on it, tie a rubber band across the front, or you can remix the file to raise the front up pretty easily.
The source file can be found here:
Please share a pic or remix if you make one. Thanks!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!