Skip to content


Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is a modified version of, I wanted to let the lamp produce more light so I made the spheres larger and thinner and added holes around the circumference of the top 2. Also, the vertical column is larger to allow more light into the top 2 spheres. Finally, I removed the base at the bottom that holds the LED light; this reduces print time by about 45 min.and also allows most any type of LED puck light to fit.

Note that this lamp is 324 mm high, so it requires a fairly large printer to print it full scale. Because the base is quite a bit larger than standard puck LED lights you can scale it down if needed.

This lamp printed in just under 13 1/2 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm. This lamp is designed to hold any one of several LED lights called "puck" lights. You can get these powered by either batteries of wall power. This blog page has links for wall powered lights that work well:

  • 3D file format: STL
  • Publication date: 2019/07/08 at 10:19





Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!