This lamp is 310 mm tall, so you may not be able to print it unless you have a delta style printer. Scaling it to a smaller size won't work because then there won't be room in the bottom for the LED light. Because of the shape of the lower part of this lamp you'll need to use a fairly short/thin LED like the one from Amazon shown in this blog page: http://birkbinnard.com/blog/wall-powered-led-lights/.
In spite of it's size this part it printed in slightly more than 13 1/4 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!