- 745 views
- 5 likes
- 4 downloads
3D model description
Enjoy 3D printed wellness for your feet. Using this during your TV session, in the garden or other beloved places. Without batteries, no maintenance is required. Just print, assemble and wellness.
I like bioplastics so i used PLA for all parts. Which seems to me tough enough for a normal application. The "Massage Roller" has a housing for 608RS bearings. It's optional to use them. If you decide to not use bearings it can be happen that it makes squeezy noise when rolling. This can be avoid by applying a little bit of a non-mineral oil to the Support Shaft's.
Please be aware, once assembled it's very hard to disassemble it again without breaking it.
It take roughly 21 hours to print all parts, the material consumption is around 110g for the minimum requirements.
3D printing settings
IMPORTANT: Printing of all parts together can lead to much more retraction before the print head travels which leads to partially thicker walls. Means that your parts won't fit nicely together. If your slicer support you can adjust the "horizontal size compensation" for around -0.15mm (shrink).
Layer Height 150 microns
Top, Bottom Layers 3, better 5
Perimeters 2, better 3
Infill 20%, better 25%
For PLA i used a temperature of 215°C which bonds the layer much better than lower temperatures.
Nozzle Diameter 0.4mm is required
Bottom Plate, print placed as in the STL file.
Massage Roller, print placed as in the STL file and add supports just from the buildplate with a max angle of 89° that should place the supports only in the housing.
Roller Mounts, print placed as in the STL file, you can add supports
Support Shaft, print placed as in the STL file and enable the brim feature
Upon request i can send you prepared gcode for Prusa i3 MK2S and Generic PLA. Tested a lot for well material strength.
- 3D file format: STL
- Last update: 2021/03/15 at 12:49
- Publication date: 2018/01/21 at 19:30
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!