SLC Temple Ornament
- 1.4k views
- 0 likes
- 51 downloads
3D model description
I scaled it down to about 50%, added a loop to use as a hanger, and printed it with 0% Infill and 1.7mm shell thickness (4 shells) and 0.01mm bottom thickness (1 layer). I cut the bottom out and glued it to a 2xAA battery holder (http://www.digikey.com/short/tz5bd1) which had a switch (https://www.digikey.com/short/qcwd5b) and 10mm white LED (https://amzn.com/B00KNTP936) hot glued to it. It pulls about 7 mA, so should last the entire holiday season (I hope).
If I was going to do it again, I think I'd go with AAAs since it is a bit heavy for an ornament, and I don't think the battery life is an issue.
See a timelapse of the build at https://youtu.be/c-8Mll6QcIw
3D printing settings
Remixed From Salt Lake City Mormon Temple by hlyman
- 3D file format: STL
- Publication date: 2018/05/25 at 16:07
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!