- 723 views
- 1 like
- 18 downloads
3D model description
This lamp is designed for an LED "puck" light. Battery operated lights are about $4 each; simply do a web search for "LED puck light" to find several sources. This blog page tells where you can get wall powered lights that are brighter and that work very well: http://birkbinnard.com/blog/wall-powered-led-lights/.
This light uses the same basic geometry as https://cults3d.com/en/home/sectionlight1, but the sections forming the sides are flipped 180 degrees so they are convex instead of concave. For this print I used 2 different filaments: regular yellow for the bottom and then transparent yellow for the top. The transparent lets a lot more light out, but it also results in more fine stringing. This print took 14 hours 3 minutes using a layer height of 0.200 mm. and print speed of 100 mm/sec.
3D printer file information
3D design format: STL Folder details Close
- Publication date: 2017/09/25 at 10:04
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!