Well I tried to put my original Scrubbie in the dishwasher which happened to be set on sanitize and some of it melted away. When I went to make myself a new one I realized the bottom layer was unnecessarily thick so I made it a lot thinner and then I had trouble with the bristles so I changed those around too. The one pictured is in Semiflex. Included is a sample scrubbie test piece so you can be sure your settings are correct before printing the whole thing.
This scrubbie weighs in at 13 grams.
I used the standard Semiflex settings in the Lulzbot version of Cura. These settings are recommend by Flexion_extruder: I put your file into Simplify3D with our standard settings (70mm/s printing, 5mm at 60mm/s retraction) and it says 1 hour 16 minutes. You could go faster with less retraction, but these settings should make it nice and clean.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!