Screw Cap Cylinder Multi-Pack
- 1.5k views
- 1 like
- 3 downloads
3D model description
JWizard’s Screw Cap Cylinder Multi-Pack - 1/16/21
Designed by JWizard
Thank you for choosing the JWizard’s Screw Cap Cylinder Multi-
We have created a previous cylinder design where the top screwed INTO the cylinder. This new design uses a cap that goes AROUND the cylinder. We have created the cylinder in many sizes and have tested printing out all of the cylinders to make sure the cap fits properly on the cylinder.
There are 20 size variations in our design. We created 4 caps. There is one cap for each cylinder width. There are 20 cylinder bottoms. The cylinders come in 4 widths: (6) 50mm, (6) 75mm, (4) 100mm and (4) 150mm. This will allow you to create the cylinders with the size you need. Do not put food into these containers! Food should never be placed into porous prints where bacteria could fester.
The following Files are included:
Cylinder 50mm by 10mm cap.stl
Cylinder 75mm by 10mm cap.stl
Cylinder 100mm by 10mm cap.stl
Cylinder 150mm by 10mm cap.stl
Cylinder 50mm by 10mm bottom.stl
Cylinder 50mm by 25mm bottom.stl
Cylinder 50mm by 50mm bottom.stl
Cylinder 50mm by 100mm bottom.stl
Cylinder 50mm by 150mm bottom.stl
Cylinder 50mm by 200mm bottom.stl
Cylinder 75mm by 25mm bottom.stl
Cylinder 75mm by 50mm bottom.stl
Cylinder 75mm by 75mm bottom.stl
Cylinder 75mm by 100mm bottom.stl
Cylinder 75mm by 150mm bottom.stl
Cylinder 75mm by 200mm bottom.stl
Cylinder 100mm by 50mm bottom.stl
Cylinder 100mm by 100mm bottom.stl
Cylinder 100mm by 150mm bottom.stl
Cylinder 100mm by 200mm bottom.stl
Cylinder 150mm by 50mm bottom.stl
Cylinder 150mm by 100mm bottom.stl
Cylinder 150mm by 150mm bottom.stl
Cylinder 150mm by 200mm bottom.stl
Materials used to create models in photos:
3d Solutech Green PLA
3d Solutech Orange PLA
Prusament Silver PLA
Esun Fire Engine Red PLA
Xvico Multi-Color PLA
We would not recommend re-sizing the model since that may adversely affect how the cap screws onto the cylinder. Whatever pla you use should work. Other materials like petg will probably work fine.
Let us know how you like JWizard’s Screw Cap Multi-Pack. Please post your makes and share your comments!
Follow us so that you will be notified when we release our next project.
Thank you for your support,
3D printing settings
No supports needed
- 3D file format: STL
- Publication date: 2021/01/18 at 03:51
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!