Skip to content

Scarecrow Lamp Halloween

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 1.4k views
  • 5 likes
  • 2 downloads

3D model description

Hello! How are you? Very well, I hope. Me? well, very exhausted but happy at the same time, because I finally could finish ordering all the parts of this extensive project and I'm very satisfied with the final result.

The printing is quite simple, I divided everything to be able to print each part easily and then join what is necessary with glue, it worked very well for me, it was all well assembled.

For the lighting, you only need a lamp holder which you must disassemble to use the thread (E27) and cable for connection to the outlet, if you can get with the button to turn the lamp on and off, much better (in any lighting store can get everything). The light bulb you use has to be with the E27 thread and the smallest size you can get, it also has to be low power consumption to prevent it from heating up and melting the pumpkin, yes, it happened . . But then I tried a low energy bulb and I didn't have any problems, everything went perfectly.

Also design a small plate on which you can place small candles (use without the pumpkin lid on) or another more decorative option is to use the led candle.

And finally for the details, you can or rather, I want you to use your imagination! This is my art, my work, and like every work must be completed by those who appreciate it. Of course, if or when you have to put some kind of rag around his neck because I left a space to put his clothes. In my case I used old clothes to make him a tattered tunic, filled his torso with a kind of wood shaving and tied his hands with thick thread that I painted with dark tones.

For painting you can use acrylics, they always work very well for me on PLA. And the colors are also to election, so, to see if they inspire and shape their vision in Noname's skin...

Yes, that's right, that's his name, as the legend goes that it's the soul of a not-so-pleasant farmer who's trapped in this creepy scarecrow, whose only wish was to be able to finish off the crows that bothered him so much, forever.

One day the crows left for good, and the farmer was never seen again, instead there was a ''nice scarecrow'' who always looked after the cornfield

Moral, be careful what you wish for.

Don't forget to send your creations and follow me on @Jay.3d_ or contact me for any question.

Have a creepy Halloween mumbo jumbo

Byes ;3


Hello! How are you? I hope that very good. Me? Well, very exhausted but happy at the same time, because I was finally able to finish ordering all the parts of this extensive project and I am very satisfied with the final result.

Printing is quite simple, I divided everything to be able to print each part easily and then join what is necessary with glue, it worked very well for me, everything was well assembled.

For lighting, you only need a lamp holder which must be disassembled to use the thread (E27) and cable to connect to the outlet, if you can get with the button to turn the lamp on and off, much better (in any store of lighting can get everything). The bulb they use has to be with the E27 thread and the smallest size they can get, it also has to be low consumption to prevent the pumpkin from heating up and melting, yes, it happened to me . But then I tried a low-consumption bulb and I had no problem, everything worked perfectly.

Also design a small plate in which small candles can be placed (use without the pumpkin lid on) or another more decorative option is to use the led candles.

And finally for the details, may or rather, I want you to use your imagination! This is my art, my artwork, and like all artwork it must be completed by those who appreciate it. Of course, you have to put some kind of cloth on his neck because I left a space to put the clothes. In my case, I used old clothes to make a ragged tunic, stuffed his torso with a kind of wood shavings and tied his hands with thick thread that I painted in dark tones.

For painting you can use acrylics, they always work very well for me on PLA. And the colors are also a choice, so let's see if they inspire and reflect your vision on Noname's skin ...

yes, that's right, that's his name, how much the legend that is about the soul of a, not so nice farmer, the one who is trapped in this creepy scarecrow, whose only wish was to be able to finish off the crows that bothered him so much, to always.

One day the crows left forever, and the farmer was never seen again, in his place there was a `` nice scarecrow '' who always looked after the cornfield

Moral, be careful what you wish for.

Don't forget to send your creations and follow me @ Jay.3d_ or contact me with any questions.

Have a spooky Halloween muahahaha

Goodbye; 3

3D printer file information

  • 3D design format: STL Folder details Close
    • Base estructura.stl
    • Brazos Esqueleto.stl
    • Cabeza Calabaza.stl
    • Cara Calabaza Halloween.stl
    • Cara Calabaza Kawaii.stl
    • Cara Calabaza Original.stl
    • Cuello.stl
    • Maderas x 2.stl
    • Palo inferior.stl
    • Palo superior.stl
    • Platito.stl
    • Tapa calabaza.stl
    • Union cuello palo superior.stl
    • torso parte 1.stl
    • torso parte 2.stl

    Learn more about the formats

  • Last update: 2020/11/01 at 18:13
  • Publication date: 2020/10/21 at 10:26

Copyright

©

Tags

Creator

Designs 21
Downloads 128
Sales US$192
Followers 12

Hi! (•◡•) /
Follow me @jay.3d_
Personal account @jay.cee.dante
✯ Diseñador 3D ✯

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!