Adjustable large adjustable pastry roll up to 70cm wide with a diameter Ø58mm.
Allows 5 different heights to spread the pasta with precision: 2mm, 4mm, 6mm, 8mm and 10mm.
Materials required :
1 Table leg h710 Ø58 mm raw beech: https://www.castorama.fr/pied-de-table-h710-o58-mm-hetre-brut/3419932817001_CAFR.prd
2 Brass cup nuts L, 12 mm x W. 12 mm: https://www.castorama.fr/4-ecrous-cuvettes-laiton-l-12-mm-x-l-12-mm/3454975700323_CAFR.prd
2 stainless steel hex head bolts 6 x 25 mm
Cut the foot to the desired width if necessary.
Drill the centre with a 10mm drill bit and screw on the brass nuts.
Drill 2 holes on each side with a 5.5mm drill bit at 20mm from the center (see the template in the picture).
Insert the hex head bolt into the part that will hold the screw.
To finish, insert in each end of the foot the piece with the thickness of your choice and then screw to hold it in place.
Printing in 0.2
30% cubic filling
No. of wall lines: 3
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!