The LED lamp uses the same basic geometry but with the twisted slats flipped to form a symmetrical pattern. That description gives info about how I developed the geometry for all these designs. This lamp is the same size as smaller one mentioned above, but becuase it has an additional set of slats it required 15 3/4 hours to print using a layer heigth of 0.200 mm and a print speed of 100 mm/sec. FOr this print I used transparent yellow filament which doesn't photograph well, but most any transparent or solid light colored filament will work OK.
This lamp accommodates either a battery operated or wall powered "puck" LED light. This blog page has links for all the wall powered parts needed and shows to hot hook everything up: http://birkbinnard.com/blog/wall-powered-led-lights/. For battery powered puck lights just go to any large home improvement store or simply Google "LED puck light".
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!