Skip to content

RETRO CAMERA FLOWERPOT

3D model description

This is my Retro Camera Flowerpot design.
You can paint however you want!
Print different sizes of them and create a cute corner in your home! :)

Modelling time 4 hours.
Polygon count is just 30.000! :)
Point count is 35.000
This model consists of 11 parts.
NO SUPPORT JUST PRINT!

You need to glue them together. You can use my design and paints. Or create your own design! :)
Share with me please! :)

No Need for sandpaper or any finishing techniques if you use 0.1mm layer height.
Hope you like guys!

You can follow my Instagram Pages.
@buyucusokagi @tolgaaxu

If you have any question about my designs or anything, please don't hesitate to write me a message!
You can also send me a message for your bulk purchase to.
See you on next projects!

3D printing settings

CREALITY CR-10 PRINT SETTINGS

15 CM Height Print Settings

*** Print Base Pot with 0.2mm (200 micron) ***
%20 infill
NO SUPPORT
60 Degrees Bed Heat
200 Degrees Nozzle Heat

12 Hours Print Time

*** Other Parts ***

Print all other parts with 0.1mm (100 micron)
%30 infill
NO SUPPORT
60 Degrees Bed Heat
200 Degrees Nozzle Heat

Other part print time is 11 Hours.
Total print time is 23 hours.
You can use sandpaper for the big part if you want it.
But I do not think so the little parts would need the sandpaper. :)

  • 3D model format: 3DS, OBJ, and STL

Tags

Creator

Followers Following 5
Downloaded 351

I make 3D designs for print.
You can follow my instagram pages.
@tolgaaxu
@buyucusokagi
https://tolgaaxu.artstation.com/

Copyright

©

Similar 3D files


Add a comment