Record Player Coaster Set

I 3D modeled and printed this record player themed coaster and storage container as a unique conversation starter with the ability to be a functional 4-inch coaster and record player storage case capable of storing 4 coasters.
The record player coaster kit uses a filament hinge and slip-fit needle to record base connection to allow for smooth rotations and installations.

All components are able to be printed without any need for supports.
The hinge uses a 5-inch long 1.75mm piece of filament.

My total print time to print my entire storage container and 4 coasters (with multi-color prints) was about 11 hours. Without multicolor printing, the print time can be around 8 total hours.

Coaster diameters are 4 inches
Record Case is about 5.5 x 5 x 2in

I've included multicolor split STLs for anyone that would like to print these as multicolor prints and have also included "Single Color" STL files for anyone would like to print these files as single solor files.

Printer: Bambu Lab X1 Carbon
Plate Type: Textured PEI
Filament: Hatchbox Blue PLA (Record Lid and Base), Bambu Lab Black, Grey, and White PLA (Record Tray, Needle, Record Outer and Record Inner
Layer Height: 0.16mm
Supports: NA
Print Speeds for everything besides records:
Outter Wall Print Speed: ≈200mm/s
Inner Wall Print Speed: ≈300mm/s
Overhang Print Speed: ≈30mm/s
Print Speeds for records:
Outter Wall Print Speed: ≈100mm/s
Inner Wall Print Speed: ≈150mm/s
Overhang Print Speed: ≈15mm/s
Bed Temp: 60 C