Skip to content

Quick Change Toilet Paper Holders + Lock || Help PattysLab grow :)

?
Creation's quality: 4.9/5 (20 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 54.4k views
  • 648 likes
  • 2.9k downloads

3D model description

Redesigned Body and Lock!
THE LOCK IS OPTIONAL!! you don't need to glue it on.

It would be awesome if you could support my channel
http://bit.ly/SubscribeToPattysLab
This means a lot to me!

INFO:

A PDF with dimensions is supplied this can be printed on A4 paper at 100% scale to use this as a 1:1 template.
The distance between the posts is determined by the size of your rolls.

The Honeycombs are refined now larger and stretch all the way to the edges, the border has been reduced for a cleaner look and the lock has been much more refined

It's wise to use the lock on both sides if you really want to make sure that the roll does not get knocked out especially with the kitchen towels.

The 5 - 25 degree pre-tension means that the screw can be tightened more before the horizontal pos of the slot has been reached.

Use a bit of your own imagination to print this properly, let me know if something is not right!

Disclaimer: this is a non-commercial product you cannot sell these without my permission


3D printing settings

PLA settings:

HONEYCOMB BODY:
Single line width 0.4mm (don't change this)
Nozzle diameter 0.4mm (don't change this)
Layer height of 0.2mm (don't change this)
Initial layer height 0.2 (don't change this)
1 or 2 perimeter lines, 2 is better but can cause warping if your print environment is to hot
Fan 100%
Hotend 210C
Bed 50C
100% infill
Supports off

SOLID BODY:
Single line width 0.4mm (don't change this)
Nozzle diameter 0.4mm (don't change this)
Layer height of 0.2mm (don't change this)
Initial layer height 0.2 (don't change this)
4 perimeter lines (0.4mm x 4 = 1.6mm)
Fan 100%
Hotend 210C
Bed 50C
100% infill
Supports off

Lock (Knob & Base), Lever arms, and L/R screws:
Single line width 0.4mm (don't change this)
Nozzle diameter 0.4mm (don't change this)
Layer height 0.2mm (don't change this)
Initial layer height 0.2 (don't change this)
1 perimeter line (don't change this)
Fan 100%
Hotend 210C (don't go lower) for the lock base 215 might even be better
Bed 50C
100% infill
Supports off

3D printer file information

  • 3D design format: ZIP Folder details Close
    • Premium_Quick_Reload.zip

    Learn more about the formats

  • Last update: 2020/12/12 at 23:28
  • Publication date: 2020/10/18 at 13:14

Copyright

©

Tags

Creator

Designs 26
Downloads 5.1k
Sales US$657
Followers 103

Hello Makers,

I like to improve life and reduce frustrations by 3D printing gadgets, tools, and accessories
And if there is anything you don't like, about my models or like to be changed just let me know by emailing me:
pattyslabb@gmail.com (yes with dubbel-bb)

or check me on youtube:
https://www.youtube.com/channel/UCmdKwVfSZhVasOl5PRLI1EQ

Issue with this design? Report a problem

Makes created by the community

Best sellers of the category Home


Add a comment

11 comments

hi, I own an online shop. I was wondering if I could use your design for my shop. I would like to purchase it, or make an arraignment, please let me know thanks
please email me at: umfrage-aschaffenburg@web.de

¡Oye! gracias por el mensaje. Debe reflejar la pieza, no girarla como dicen las instrucciones. Así que cargue en una mitad, luego duplique una mitad y luego refleje esa mitad. Esto con usted obtendrá el otro lado necesario para completar su conjunto. Así que no rotar sino central :)

buenas tardes acabo de comprar el modelo pero al parecer le faltan piezas ya que solo me sale un lado del soporte nada mas y si lo giro 180 grados no sirve de antemano muchas gracias

It's wise to use 2 locks if you opt for that Option

No supports should be added

Thank you! Treat work!

Bonsoir,

On peut imprimer sans support sans que la couche du dessus ne tombe ? Je débute en impression 3D.

Merci

The walls have a fillet..... Just disable supports and print. Which model are your printing specifically?

I'm not sure how you printed this without tons of support material. I can't find a way to print this without having tons of support structure, on the honey and non honey editions. I think if you taper the walls in at 45 degrees to the top of the model, you wont need any support. I'll have to edit this in order to print it without wasting tons of support material. I'm not even sure how i would get it all out of the honey comb model. Can you shed some light on this?

I'm completely sorry the page was still in the editing mode hence why I think the folder was empty maybe the website doesn't allow that. I downloaded it and the files are in there :). If there are any more problems just let me know

I downloaded this and the folders were empty. No actual print files.


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!