Blank page holder
- 699 views
- 2 likes
- 55 downloads
3D model description
Here is a page gate without writing (initial).
It is possible to put several pages horizontally or vertically but also memos or various flyers.
In order to have a stable door, fill it with sand or pebbles and then glue the bottom with a strong glue.
I advise you to add non-skid pads under the door page not to do hockey;)
I also made a customizable version with writing on the front of the bridge: Customizable page holder.
3D printing settings
Layer: 0.1mm (is preferable but 0.2mm is sufficient)
Filling: 20 to 30%
Type of adherence of the tray: skirt
Support filling: 10 to 15% (only in contact with the tray)
Extruder temperature: 200 ° C
Tray temperature: 60 ° C (not mandatory)
Note: The print parameters are given as an indication.
- 3D file format: STL
- Last update: 2017/10/29 at 17:46
- Publication date: 2017/09/27 at 20:02
Page translated by automatic translation. See the original version.
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!