Coat rack for WRC rally fans.
The set is composed of the 3 letters W, R, C, a coat rack piece to be printed 3 times, and a cover to be printed 5 times to hide the screws.
It is fixed with 5 countersunk head screws 3 to 4 mm in diameter. In my case, it is screwed on a painted wall bracket, itself fixed on the wall, but you can fix it directly to the wall.
For assembly, the coat racks are attached behind the letters by aligning the holes to allow the screws to pass through, which will hold the assembly. The letters W and R are also connected together by a screw.
Then I glued the covers to hide the screws.
It's been 3 months since I installed it, and in terms of strength, it hasn't moved at all.
Printed on a Dagoma Discovery 200:
Flat printed letters with support and side coat racks without supports
Fiberlogy PLA Filament
About 1 hour by letter and 45min by coat rack
Simple Designer sans prétentions qui souhaite juste partager ses créations.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!