Portafilter Outlet 3/8"
- 89 views
- 0 likes
- 0 downloads
3D model description
Due to the surprising success of my portafilter spout that just doesn't splash or sputter I've been asked to adapt this design to another espresso maker:The Lelit Anita. Since the thread is a "standard" 3/8" screw it's supposed to fit other models too.
Material-wise I recommend some high-temp food-grade plastic such as Colorfabb HT. Here I used ONE PET filament because I've already had good long-term experience on this exact application. There's a chance of nasty stuff to leach out at 100°C, but I don't think that will happen on a relevant level since the contact time for espresso is very short. Otherwise you'd be doing it wrong and that extra plasticizer serves you right.
(I haven't tested this design since I don't own this espresso machine, but the user - who also sent me the pictures - says it fits like a glove. Or a mitten. Whatever.)
3D printing settings
- 3D file format: STL
- 3D model size: X 36.8 × Y 20 × Z 33.9 mm
- Publication date: 2021/03/12 at 01:12
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!