Hello, I present my prototype for the contest;
I am a young forestry company manager, I work in contact with nature and contribute to the proper functioning of its ecosystem. I also do a lot of Paper (yes I make it and recycle it) at the administrative level, like all entrepreneurs, you have to run, go fast, always do better by going faster! This is why time is already saved in the bathroom before an appointment.
I am a very maniacal person and I always attach great importance to nature,
I hate having shampoo pots lying around in the bathroom so I fixed that problem.
So I'd like you to meet my shower head;
This shower head is composed of a shampoo tank that is filled with a 250ml refill (cheaper and more ecological), it allows to have no polluting and expensive plastic pot that hangs on the edge of the bathtub.
The shower head is equipped with a basic shampoo distribution system at the touch of a button. The spring returns the zipper to its place which allows a single dose to be poured and mixed with water so as not to waste shampoo.
You save time because there is no need to cut the water, hang up the apple, take the shampoo and rub your head, then go back and so on... There you hold the apple in one hand and rub with the other, no need to stop.
In short: More ecological, more economical, more practical.
Before starting the assembly, you will need sealing compound, a screw, special bathroom glue, a piece of membrane to plug the hole in the zipper and a spring.
Screw your standard pipe onto it
I printed it, and frankly, it's cool. Try it.
Print in quick adjustment 0.2mm to 40mm/sec
Total printing time: 11h08min
Wire distance used: 57m01cm
Weight of wire: 174 Grs
All without support
/!\ there are two pieces to return for printing
Page translated by automatic translation. See the original version.
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.