Skip to content

Phelps3D Filament Spool Recycle Multipurpose Planter Candleholder Birdfeeder

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 240 views

3D model description

This design was created as an entry into the Printed Solid 100 Spool Giveaway contest featured on Chris' Basement. I tried to keep the design simple and the parts could be used to create a planter, candle holder, birdfeeder, or anything else you could hang. I would suggest using bailing or picture wire if you want to hang the candle and long enough that the hook will not deform from the heat. Also, the glass candle will need at least a 58 mm diameter hole to fit. (A side idea was to also use the spools as a kind of bumper on the patio or porch to keep rambunctious kids or inebriated guests from knocking them over.)

Depending on the configuration of the spool there are 4 hole and 6 hole plates to place over the hole. You might want to use some caulk for the planter. Both to seal the bottom and possibly any seams inside of the spool. The screws I used were #10-32, but the holes are 4 mm in diameter so anything that size should work. There are blocks that can be used in case your spool has too many holes to just drill through.


3D printing settings

I printed these at 0.28 mm layer height and 20% infill.

3D printer file information

  • 3D design format: STL Folder details Close
    • FilamentSpoolMultiusePlate4Hole (repaired).stl
    • FilamentSpoolMultiusePlate6Hole (repaired).stl
    • GeneralHook (repaired).stl
    • MultiuseProjectScrewplates (repaired).stl
  • Publication date: 2021/07/21 at 22:07

License

CC BY NC SA

Tags

Creator

Designs 265
Downloads 693
Sales US$177
Followers 30

3D Printing Nerd, been using FreeCAD since 0.13. Work with both FDM and Resin 3D printers. Can do commissions, but mostly non-organic models.

Issue with this design? Report a problem

Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!