Skip to content
Free STL PETER USB Case with Keyring, Emese
C87e74c3 6867 4c6c a05b 73e68ab7d2d8

Makes created by the community

Did you 3D print this model?

PETER USB Case with Keyring

3D model description

This PETER shaped 2 in 1 model is a keychain with usb functionality. Stick a usb memory stick into it and your drive is always by hand. Moreover, everyone knows whom it belongs to. This is PETER's property. :)

Such usb cases and keychains can be personalised at .

3D printing settings

Wall Thickness: 0.8 mm – The Extrusion of our printer's nozzle is 0.4 mm. Therefore 1 shell is not enough to provide sufficiant strenght, however 2 shells and a total wall thickness of 0.8 mm gives a good print result. This will be a strong and durable USB case in fact.
Infill: 15% – Minimum 15% infill is recommended for stability. Otherwise the outcome might easily brake. Please use this setting for satisfactory result. Obviously you can higher the percentage of infill, but do not lower them for the sake of strength and durability. This is a honeycomb-shaped infill. In case you use this setting of 15% infill one print will take about 30 mins, no more.
Printing Speed: 150 mm/sec – Printing Speed has an influence on quality.

  • 3D model format: STL



Followers 6 Following 0
Downloaded 207

Running together with my husband and his sister. We created a platform, where you can personalize your own usb flash drive or key ring.



Similar 3D files

Add a comment