Skip to content


Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1 like

3D model description

I've posted LED lamps with openings of various shapes in them before, but I the openings were more or less randomly placed. I recently found a way to make the openings evenly spaced (by mapping a rectangular array onto the lamp's surface) and I used that method to make this lamp.

It turns out I went a bit overboard - the 7-pointed star shapes present a significant challenge for any 3D printer: there are lots of places where stringing can occur, and the tiny star points create very small/short extrusions that will make blobs if your extrusion settings are not spot on. So in a sense this lamp will be a true test for any printer. Perflamp2 will be smaller and simpler and much easier and quicker to print.

This lamp printed in a little less than 26 1/4 hours using a print speed of 80 mm/sec and a layer height of 0,200 mm. This lamp is designed to hold any one of several LED lights called "puck" lights. You can get these powered by either batteries of wall power. This blog page has links for wall powered lights that work well:

  • 3D file format: STL
  • Publication date: 2019/05/29 at 09:55





Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!