Pencil case

Would you like to support my work? :)
Become a member (https://thangs.com/designer/gazzaladra) to get access to my full catalogue with exclusives, early access and discord benefits

A small pencil case intended for travel. A quick-to-print and robust companion for drawing or taking notes.
The Files are provided with and without the compartments. Without compartments it can also be used for other writing or drawing equipment.

Before insertion bend the lid in the front a little to ease up the living hinge. Move it in and out a few times to “sand down” minor print inconsistencies.

Size closed: 190 x 50 x 20 mm
Inner size: 180 x 42 x 15 mm
Maximum pencil size: 180mm length, 15mm diameter
Compartment width: 12,6 mm

This is the V2 – The V1 is still included

Required build volume: 210x210x30mm (can fit a even smaller print bed if rotated)
Material usage: 60g
Print time: 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If your printer tends to warp – print the base with a brim