Skip to content

Peeps Container

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 268 views
  • 1 download

3D model description

This is a derivative from http://www.thingiverse.com/thing:213858. I just hollowed it out put in a thread and created a threaded plug and voila. It sits up a little higher with the plug in as can be seen in the last picture.

Ok, not complicated but I've only had my 3D Printer for a week at this point. My plans are to put one out as a micro geocache next Easter.

3D printing settings

Printed in ABS with a .2 layer height, 10% infill. No support needed. Used a Sharpie to color in the eyes.

I've printed 3 so far and the threads fit from tight to 'very tight'. I didn't adjust because having them very tight will make it more water/weatherproof if I put it out in the elements. I've noticed that the threads screw together a little easier after screwing/unscrewing a few times.

Derived from: http://www.thingiverse.com/thing:213858

  • 3D file format: STL
  • 3D model size: X 116 × Y 48 × Z 33.3 mm
  • Publication date: 2021/01/27 at 06:13

License

CC BY NC

Tags

Creator

Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!