PAT THE DOG - LAMP / DECO

MAYBE FRIENDS TV SHOW FANS WILL RECOGNIZE THIS DESIGN. IT'S INSPIRED BY THE SCULPTURE OF "PAT THE DOG," CHANDLER AND JOEY'S DOG THAT MONICA HATED SO MUCH.

YOU CAN USE IT AS A DECORATIVE LAMP HOLDER OR FOR SIMPLE DECORATION, FOR YOURSELF OR AS A GIFT FOR A FRIEND WHO IS A FRIENDS FAN.

I HOPE YOU LIKE THE DESIGN AND ENJOY PRINTING IT.

PLEASE READ THE FOLLOWING NOTES IF YOU'RE GOING TO DOWNLOAD THE FILE:

NOTES:

-THE MODEL IS TALL, APPROXIMATELY 340MM.

THE UPLOADED FILE IS UNCUT. I DECIDED TO DO IT THIS WAY FOR THOSE WHO HAVE A PRINTER CAPABLE OF PRINTING LARGE VOLUMES, AND ALSO SO THAT EVERYONE CAN CUT AND OPTIMIZE IT IN THEIR OWN WAY.

-2 BASES ARE INCLUDED, ONE THIN, 3MM HIGH (AS SHOWN IN THE PHOTO), AND ANOTHER 10MM HIGH.

THE BASE IS ESSENTIAL IF YOU'RE GOING TO HANG THE LIGHT. WITHOUT THE BASE, THE MODEL WON'T SUPPORT THE WEIGHT OF THE BULB AND WILL FALL.

-THE LED BULB SHOWN IN THE PHOTO IS E14, 97MM HIGH. IF YOU USE AN E27, THE DIMENSIONS MAY VARY AND IT WON'T LOOK IN THE SAME PROPORTION AS IN THE PHOTO.

-THE CABLE USED IS TYPICAL FOR TABLE LAMPS (3/4MM X 5MM). IF YOU USE A THICKER CABLE, IT WON'T FIT IN THE DOG'S MOUTH OR THE RETENTIONS OF THE BASE.

-USE LED LIGHT. IF YOU USE ANOTHER TYPE OF BULB, IT COULD HEAT UP AND DEFORM THE MODEL.

-FOR PERSONAL USE ONLY

-NO DISTRIBUTION OR MODIFICATION OF THE FILE

-NO COMMERCIALIZATION

If you are interested in selling physical prints of our models and other benefits, check out my Patreon.

PATREON LINK:

https://www.patreon.com/Plop3D

FEEL FREE TO CONTACT ME FOR ANY SUGGESTIONS

DIMENSIONS

DOG: 86.2 X 260.4 X 338.4 MM

BASE 1 (3MM) : 120.2 X 205.1 X 7.1MM

BASE 2 (10MM) : 120.2 X 205.1 X 15.1 MM