I present a small umbrella with drops of water Dig in order to slip there a self-adhesive mirror-like sheet for the photo
That you can hang anywhere!
Ideal for a child's room
The umbrella and the water drops was printed in PLA, and painted with acrylic paint and paint with glitter then I varnished them with an aerosol all supports fast drying (interior / exterior) for better holding of the paint
Size for the umbrella 7.3 cm by 7.7 cm and 2.8 mm depth
Size for a small drop of water 1 cm by 1.4 centimeter 2 mm deep on the file they are by 4
40% Sufficient filling rate if painted thereafter
60% print speeds not too fast for better rendering
215 ° PLA printing temperature
60 ° shelf temperatures
0.2 layer thickness 0.8 shell thickness
Print time for the umbrella 25 min with its parameters and 2 min for the four drops of water
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces rêves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
instagram : https://www.instagram.com/catf3d/
twitter : https://twitter.com/catf3D
tumblr : https://catf3d.tumblr.com/
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.