this is just a redesign of the can for the trash walker it's set for printing at 200% or larger!
I went to print the trash walker larger but had 2 issue, 1st was the time! was over 80 hours for just the can!! 2nd was when I tried it in spiral mode there was issues with too heavy of over hangs so there was missed/hollowed areas in all the rounded areas of the indents. :/
I redesigned it for printing the rest of the stock part at 200% or larger to print faster as the walls are only 1.2mm thick so just 3 shells and no infill. Also the indents are shallower so there shouldn't be any missed or drooped areas if you print in vase mode.
It fits perfectly inside the ring and rest of the original trash walker parts printed at 200%, it's already sized up!! (if you want to print at the original unit's normal size, print this at 50%)
(have I stated 200% enough yet?)
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!