Skip to content

Bird feeder

3D model description

The feeder consists of 3 parts.

A cover, a spiral and then a decorative element.

The spiral is mounted on the cover (see explanatory video)

The decorative element is taken from the "Cults" database (

The cover has a hanging hole.

Two coil diameters are possible: diameter 4 or 7mm.

The decorative element is available with or without functional clearance (depending on the printing mode chosen)

The turns can be attached to each other with a wire to limit their elongation.

Important: The pellets must be inserted before assembling the cover.

3D printing settings

The cover alone can be printed without support.

I recommend a filling of at least 80% for the spiral and the use of supports from the tray.

Caution when separating the supports!

  • 3D model format: STL and ZIP





Page translated by automatic translation. Suggest a better translation

Similar 3D files

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!