MATTE LIGHT

LUZ MATE is a creation designed to solve the difficulty of sebar matte on trips or night spaces without the need to opt for other lighting that bother other people with the high brightness caused by these, therefore, LUZ MATE is designed to illuminate the matte area with a low brightness.

Details:

this design is intended for the model to be assembled with only one 3mm led and one battery (CR1616) of 3v.

the led should be assembled (photo:2) so that the Cathode (photo: LED) touches the negative of the battery, i.e. the leg of the led (Cathode -) should be positioned in the surface groove (photo: 2).

The MATTE LIGHT model should be left (photo:3) and then put on the protective cover.

Diameter of traditional bulb (photo:4) : 8mm.

For bulb larger than the traditional bulb (photo:4) the LUZ MATE model must be printed in FLEX filament because this way the support that holds the bulb can expand and adapt to different bulb diameters:

Printer: Creality ender 3 v2

Filament: petg (for traditional bulbs) or Flex (for larger ones)

Layer height: 0.20mm

Printing time: 18 minutes

Dimensions: 25x15x20

Printing speed: 50mm/s

Nozzle: 0.4mm