I designed a base for a levitation module i purchased on ebay. Add a lithophane thats 100mm in diameter and you got a awesome floating glowing lamp for your room.
The levitation module is heavy and the magnet is strong, so use 100% infill at the top of the base (the side with the hole is the bottom) and use 20% infill in the middle.
I also did 100% infill for the base cover.This will ensure you dont damage the board if you dont put the disk exactly in the center.
it helps to thread the holes on the base first with the screws before putting on the cover.
To Make the glowing light on the base, you will need clear PLA. Change your filament at Line 21 and make it as thick as you want.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!