LED strip - clamp clip holder
- 295 views
- 1 like
- 18 downloads
3D model description
NEW models: Added a version for nails.
Usually a LED strip has some sort of adhesive tape on the backside. But somehow this tape, even when being supplied by a brand like 3M, won't stick for a long time. So I designed this small clamp to fixate a LED or RGB LED strip on any furniture you can drive a screw into.
A second version is for glueing when you don't want to use screws and the old (and barely sticking) adhesive tape on your strip can't be fully removed.
A third version is for using a nail. The hole is just big enough for a standard nail like found with IKEA furniture.
For all versions you will find two models, one with a loose fit (e.g. when the strip has to be pulled though the clamp) and on with a very tight fit.
I designed this for strips measuring around 3 x 10 mm.
3D printing settings
You should have a well-sticking printbed. The objects are quite small, so if they disconnect from the bed use a raft or a brim.
- 3D file format: STL
- Last update: 2021/03/23 at 10:03
- Publication date: 2021/03/06 at 01:30
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!