Skip to content

Laundry Drying Rack single and double hanger

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

So, because every time it was impossible to have the laudry drying rack in the same place or to not have it in the way or just supported on the wall, again, my wife asked me if I can do some hanger for the racks and just hang them on the wall so that the floor it's clar under and we can use that space. Hmm.. good idea! Some time in thinkercad and this is what came out.

3D printing settings

You can print the holder with pla, any layer heigh work's good, I made mine in 0.2mm and the infill has to be greater then 50% so that it will hold the weight of the racks.
To mount it I drilled the wall with a 5mm drill, and used a 4x40mm wall anchor screw for a concrete wall. If you have a thiner wall just use the right anchor screw tipe (like for gypsum wall or playwood wall)

  • 3D file format: 3MF and STL
  • Last update: 2021/02/15 at 14:12
  • Publication date: 2020/03/19 at 16:16





Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!