Skip to content

Makes created by the community

Did you 3D print this model?

KIKO! Folding three-leg stool customizable to the inifini

3D model description

It is a stool with an elegant look. Its three legs and seat are made to make what makes your stool a unique object with all the blows.

For the feet you will need 20 mm diameter pins, the feet must measure 31cm for a seat at 35cm from the ground.

For the board you need a disc (or other shape) of 30cm Diam. on 8mm (commercial plywood).

At the hardware level:
8 screws M4x20
4 screws M8x30 flat head (for a plate of 8mm)
4 locknuts M8
4 washers 30x1mm tapped
4 screws M3x20 flat head, see if wood screws are suitable
1 spring of maximum of 3mm of Diam. WARNING ! For mounting the release ring and its spring must be placed before the support of the front foot.

A wall bracket is available so that your stool can have its place in your interior decoration.


09/10/17 update of the error correction model

3D printing settings

For printing I would recommend a minimum of 0.9 mm in walls and a filling of at least 45%.

It is necessary to print a second support of rear foot in symmetry, the connection piece is to be printed in 100% filling and it is necessary to symmetrize a second also.

For the orientation I think that supports will be necessary in any case so to you to see.

  • 3D model format: STL



Followers 19 Following 2
Downloaded 121
Sales $5

Etudiant en Design Industriel



Page translated by Google Translate. Suggest a better translation

Similar 3D files

Add a comment