I present you an igloo lit by a candle with battery (I advise you not to use a real candle, I'm not sure that the pla supports the fire :) nor your tree ...... :))
very decorative in the evening on a garden table or on Christmas Eve with fir tree or at the edge of a fireplace .........
the igloo was printed with white abs, can be decorated and / or painted with acrylic paint and then varnished for better paint performance.
the igloo measures 8 cm by 8 cm and 5.8 cm high
the igloo lid is 8 cm by 8 cm and 6 mm high
I had the idea of creating small houses to be able to make a CALENDAR OF the original AVEN and being able to serve again by turning into PHOTOPHORE.
I will take advantage of his small houses to make me a Christmas decoration by creating a village under the tree with all these accessories.
AND GOOD CHRISTMAS DECORATION
filling rate 50%
80% printing speed
abs 225 ° (on the photo pla natural)
thicknesses above 0.2
layer thickness 0.2
shell thickness 0.8
very little support only at the roof level
printing time of the igloo is 3 h 45min
Printing time of the lid of the igloo is 37 minutes
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces reves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
I model since January 2017, it became my passion ...
creativity is the art of accomplishing these dreams
my facebook page: https://www.facebook.com/catf3d/?modal=admin_todo_tour
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!