Hotend Stein

Ahh who dosnt love a nice icecold drink in the summer time....bzzz....but wait what is that?! Go away Bee! Dont you dare land in my drink! ...... Theres a solution for that! Print you very own hotend stein with build in room for a straw! Now you can laugh at those pesky critters when they try and steal you drink! 3d printing is awesome!

Important when buying the design:
This is my design and copyight to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you purchace this file.

For buying the commercial version where you can print and sell copys of a physical 3d printed version, go here:
https://cults3d.com/en/3d-model/home/hotend-stein-commercial-version

I used a .4mm nozzle, .3mm layer height, I use 2% infill
I printed the lid and the body using tree supports, that worked very well for me. I used 3 walls.

This print is made in 3 parts:
A hotend
A body (either with or without handle)
and A nozzle lid.

For assembly, simply glue (i use 3d gloop! PLA) the hotend part to the body, and use a piece of filament to mount the lid, bending it down in both ends to keep it in place. It fits 1,75mm filament.

Make sure your printer is all set with a good calibration and retraction before printing it :-)