his honey dipper is designed to fit in a standard jelly jar (or 8oz canning jar). Just replace the seal part of the standard lid that comes with the jar with this lid and honey dipper assembly.
The tolerances for the stem and the lid are very tight, so I recomend using a standard kitchen can-opener-griper to help twist while assembling the parts. The fit is so good I haven't had to use glue to attach the two parts. If it is too tight of a fit you can either do a little sanding or print the dipper part a few percent smaller in size.
- Use a food safe filament (I used MakerGeeks Raptor PLA)
- To print the Bee on the top of the handle change color at 47.2mm. If you are printing the stem at the same time then just switch back to the original color at around 49mm.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!