Hellfire Club Drinks Coaster - Inlay Print

Hellfire Club Drinks Coaster.

A Stranger Things themed drinks coaster measuring 102mm squared (designed to fit most drinking vessels). Looks absolutely amazing when printed on a flat glass bed revealing a glass-like finish to the top of the coaster.

This model is in 2 pieces and will require printing with an inlay technique seen here: https://youtu.be/0Sla-vIsvh4. I have attached an image of part way through the print to help understand how this works.

Effectively, you need to print the inlay section first (3 layers) then print the outer section second using 'Z hop' to avoid colliding with the previous print.

These are the print settings used in the photo:

0.3mm nozzle (using smaller will reveal more detail of the design)
Flat glass bed
0.2mm layer height
First layer: 5mm/s
No cooling for first 3 layers
2 different filament colours
Use inlay technique demonstrated in the video in model description.
IMPORTANT - You will have to flip models in your slicer so they are positioned face down.

This is quite a challenging print, but if the first layer goes down fine, the rest should work nicely.