Skip to content

Helix Vase

Creation's quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Hello everyone,

This is a helix vase/holder that serves two different purposes:

1- Vase
2- Lampshade for small battery-powered candles

Printing in higher resolution will yield better results since there are many overhangs. Good cooling and printing with the minimum recommended temperature for your material of choice helps as well.

A little bit of a warning if you're using an old laptop/PC with low specs; slicing these models can take a long time especially the EXTREME version. Proceed with caution!

If you like my work consider supporting me by purchasing one of my models from Cults3D:

3D printing settings

Layer Height: 0.2mm or finer

No raft or supports are needed

Infill 10%

The use of Z-hop is very important (a value of ~1mm is good)

Slowing your printing speed as the print progresses is very recommended to lessen the shaking of the pillers.

  • 3D file format: STL
  • Last update: 2018/11/19 at 17:14
  • Publication date: 2018/11/17 at 12:15





Makes created by the community

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!