Skip to content

Did you 3D print this model?

Heart-shaped bath bomb mold

3D model description

For Valentine's Day or any day!

Print these out, make your favorite bath bomb recipe, and pack it into the mold for a special, large bath bomb! Your significant other (or even you) will be thankful you did.

This is an EASY print, though it takes time. I recommend a traditional grid or honeycomb infill of 15-20% with at least 4 top layers for good support of the bath bomb materials.

Have fun!

If you want to support me and get GREAT filament at the same time, please visit Proto-Pasta using my affiliate link and get yourself some excellent HTPLA! http://www.proto-pasta.com/?aff=51

3D printing settings

Try using a grid or honeycomb infill at 15-20% with 4 top layers for good strength - you'll need to be able to put some pressure on the parts to squeeze the bath bomb mix together.

Use supports so that the hooks will print as they are off the bed.

  • 3D model format: STL

Tags

Creator

License

CC BY NC

Similar 3D files

Best sellers of the category Home


Add a comment