It is a hook, originally made for a coat rack with several hooks, but can be used independently as a coat rack or other need.
It is installed with a single screw. To keep it firm, make two holes, one for the screw and one for the protruding cylinder. This way it always stays straight.
To artificially generate symmetry, you have a screw head modeled on one side. Ideally, the screw used should have the same head.
For a coat rack with several hooks, one hook of each colour can be printed.
The model shown in the images was printed at 50% density and 0.15mm line height. But if you want more definition you can set it to 100% and 0.1mm.
Its approximate dimensions are: 4cm x 4cm x 3,7cm.
I´m an Industrial Designer. My current job is at a maker space project that will be implemented at educational centers.
I´m also a carpenter that enjoy making any objects with wood. By now, my daughter is my target audience ;)
Page translated by automatic translation. Suggest a better translation