A fruit bowl that simulates the branches of a tree. This model is printed with a 10% filler but it is recommended to use 15% or 20% for durability, however it is quite resistant with 10% thanks to its 3 points of union.
-Print speed = 60
-Stuffing = 15% - 20% (minimum recommended)
-Layer height = 0.15 - 0.2 (can be printed in thickness)
IT DOESN'T NEED SUPPORTS!
Although in the laminator you are asked to use supports, this model is printed without supports because thanks to the arrangement in which the branches are the material is printed perfectly to save the material of the support.
In the laminator is scaled to obtain a Ø of 271 mm and a height of 152 with the following values:
X (1100), Y (1100),Z (1500)
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!